Others in this category
  • Berger Grip&Seal Multi-Surface Primer Sealer

Berger ALD Concrete Primer

The ideal high-hiding primer for sealing and preparing masonry surfaces for the application and adhesion of topcoats.

Berger A.L.D. Concrete Primer is a low odour, fast drying and an excellent latex based emulsion primer, specially formulated for new interior and exterior, cured concrete walls in a tropical environment. It has proven to be a very economical choice in providing good hiding-power, excellent spreading rate and a high solids content.

Features

See all
Anti-Fungal and Anti-Algal PropertiesFor interior and exterior use

Surface preparation:

  • Surface must be clean, free contaminants, mould and mildew
  • Scrape off loose paint and sand to a smooth surface
  • New plaster must be cured at least 30 days before priming
  • For adhesion on glossy surfaces, scuff sand surface thoroughly before priming
  • Treat fungus and algae with Berger Sterilizing Solution

 

Application Procedure:

  • Ready-to-use formulation
  • Apply by brush, roller or sprayer
  • No mixing required
  • Stir thoroughly before and occasionally during use
  • Dilute no more than 10% water for spray application
  • Prime the entire surface to ensure a uniform appearance of the topcoat
  • Berger ALD Concrete Primer is tintable
  • Tinting recommended in a lighter shade than the topcoat when painting dark colours
  • Application in wet humid conditions will slow drying time

 

Tips: Primers provide an extra wear-layer and facilitate adhesion of the topcoat to its surface, and are ideal especially in cases of extreme exposure.

Tools you will need

Paint Brush
Paint Roller
Spray Gun

Available Packs


1 Gallon


5 Gallons

1 Coat
11.00 m2/Ltr**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Solve Potential Paint Problems

1What’s causing white crusty deposits on the walls?

Efflorescence is the formation of crusty white salt deposits, leaching on to the surface of masonry or mortar as water passes through it.

What are the possible causes?

  • Efflorescence occurs when water gets into concrete and dissolves lime within the concrete matrix
  • As the water evaporates, lime is carried to the surface and deposited as salt
  • Excess moisture escaping through the walls
  • Insufficient curing time for new cement or mortar
  • Painting on incompletely dried or uncured concrete
  • Failing to adequately prepare the surface by removing all previous efflorescence

What is the solution?

  • Eliminate the source
  • Seal cracks with Berger Siliconized Acrylic Caulk
  • Remove efflorescence and loose material by wire brush or power washer
  • Apply Berger Alkali Sealer
  • Apply a premium quality topcoat like Berger Weatherproof Ultra

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Second Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Base Coat
    Berger ALD Concrete Primer
2My walls and ceiling were white when painted, and now they’re yellow. Why is this?

The yellow cast that appears over previously painted white surfaces is called yellowing, and mostly occurs with oil paints.

What are the possible causes?

  • Use of oil paint in areas not receiving direct sunlight
  • Oxidation of alkyd or oil-based paint or varnish as it ages
  • Heat from stoves, radiators and heating ducts will turn oil paint yellow
  • Lack of light in dark areas such as behind picture frames, appliances and inside closets
  • Tobacco staining or other environmental contaminants

What is the solution?

  • Because of their drying process water-based painting systems fear better in enclosed areas
  • Water-based acrylic paints are non-yellowing
  • If your preference is for oil paint, ensure maximum sunlight to minimise yellowing

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Second Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Everglow Low-Sheen Emulsion

  • Second Coat
    Berger Everglow Low-Sheen Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Second Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Base Coat
    Berger ALD Concrete Primer

  • First Coat
    Berger Trowel Fine
  • Get Inspiration

  • Make Your Plan

    Let us design a project plan to suit your needs.

  • Colour Tools

map
LOCATE A DEALER
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!