Themes

My Profile My Library Logout
Menu
Others in this category
  • Berger Grip&Seal Multi-Surface Primer Sealer

Berger Zinc Chromate Red Oxide Primer

Red oxide primer is a specially formulated coating used as a base coat for ferrous metals.

Home / Product Listing Page /Berger Zinc Chromate Red Oxide Primer
Material Safety Data SheetProduct Data Sheet
Berger Red Oxide Primer is formulated for interior and exterior use on ferrous metal and is not usually suitable for galvanized or nonferrous metals like aluminium, copper or brass. Ferrous metals contain iron. To confirm if your metal is ferrous or nonferrous, test it using a magnet. Ferrous metals are magnetic, and nonferrous metals are not. Berger Red Oxide Primer is an anti-corrosion coating, designed to stop rust formation. It can be applied directly over a rusty surface and is most ideal for exterior use. Red oxide primer can be coated with Berger 404, Rustpro or Machinery Enamel once dry.

Features

See all
Excellent adhesionAnti-rust protectionPerforms well inside and out

Surface preparation:

  • Ensure that all substrates are clean and free from grease or oil
  • A clean surface ensures proper adhesion of the primer
  • Remove all loose and flaking material by scraping with a paint scraper, wire brush or by sanding
  • For some metals, flame cleaning or grit blasting may be necessary

 

Application Procedure:

  • When applying red oxide primer, use a brush or a short pile roller Thinning is not required if applying by brush or roller
  • For airless sprayer thin primer 10% to 15% by volume with Berger No. 2 Reducer
  • Begin thinning with a little solvent and add more as needed until the right consistency is achieved
  • Spray red oxide primer onto the surface with a minimum working pressure of 2000 psi
  • Apply 1 coat to provide an adequate base coat to your metal
  • It becomes dry to touch in 15 mins, can be handled in 1 hour, and recoated in 4 hours.

 

Tips: Berger recommends applying two (2) coats in conditions of high humidity and severe exposure.

Tools you will need

Paint Brush
Paint Roller
Spray Gun

Available Packs


1 Gallon

1 Coat
6 m2/ ltr**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Solve Potential Paint Problems

1How do I get rid of unsightly mildew on my walls?

Mildew is both an interior and an exterior problem found in damp areas receiving little or no sunlight. It appears as black, grey, green, or brown spots on any surface.

What are the possible causes?

  • Failure to treat existing mildew before painting
  • Using lower quality paints with little or no biocide
  • Failing to prime bare wood before painting
  • Painting over a substrate or coating from which mildew has not been removed

What is the solution?

  • Treat mildew with Berger Sterilizing Solution
  • Remove mildew by pressure washing the surface
  • Allow solution to remain on surface for at least 1 hour
  • Rinse thoroughly with water and allow surface to dry before painting
  • Wear protective eyewear, protective clothing, and waterproof gloves
  • To protect against re-growth use premium quality paint
  • Clean high-moisture areas at 6 month intervals to slow re-growth

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Second Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • Second Coat
    Berger Everglow Low-Sheen Emulsion

  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • Second Coat
    Berger 303 Flat Emulsion

  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • Second Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • Second Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • Second Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger White Wood Primer

  • Second Coat
    Berger 404 Gloss Oil Paint

  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger Zinc Chromate Red Oxide Primer

  • Second Coat
    Berger RustPro Anti-Rust Enamel
2What are those reddish-brown spots on my wood and walls?

Reddish-brown stains on the paint surface are called nail head rusting and are usually a sign that the surrounding wood may be rotting.

What are the possible causes?

  • Non-galvanized iron nails exposed to moisture
  • Nails not properly countersunk
  • Nail heads not caulked with siliconized caulk before painting
  • Frequent exposure to damp wood

What is the solution?

  • Completely remove the nail and replace with a new nail
  • Wire brush each nail head until bare shiny metal
  • Clean and spot priming with appropriate Berger primer
  • Caulk nail heads with paintable Berger acrylic caulk
  • Topcoat with premium Berger acrylic or oil paint

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Second Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Second Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Base Coat
    Berger Zinc Chromate Red Oxide Primer

  • First Coat
    Berger RustPro Anti-Rust Enamel

  • Second Coat
    Berger RustPro Anti-Rust Enamel

  • Base Coat
    Berger White Wood Primer

  • First Coat
    Berger 404 Gloss Oil Paint

  • Second Coat
    Berger 404 Gloss Oil Paint

  • Base Coat
    Berger Zinc Chromate Red Oxide Primer

  • First Coat
    Berger Marine Enamel

  • Second Coat
    Berger Marine Enamel
3Why do I have a patchy paint finish?

Patchiness generally occurs when insufficient paint has been applied or when paint is applied unevenly, resulting in a variation of the film build leading to patches.

What are the possible causes?

  • Inconsistent distribution of paint on the surface
  • Incorrect or low quality paint brush or roller
  • Failure to apply a primer over joint compound
  • Applying paint over joint compound not fully dried
  • The top coat is applied over spot-puttied surfaces
  • Variations in surface gloss can cause paint to appear patchy

What is the solution?

  • Increase the amount of paint on the brush or roller to allow better distribution
  • Apply the paint in a grid fashion to ensure an even finish
  • Allow puttied wall to dry evenly before priming
  • By applying one coat of appropriate premium Berger Primer
  • Apply two coats of premium Berger acrylic topcoat
  • Refer to Berger Technical Support for primer options

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Second Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Everglow Low-Sheen Emulsion

  • Second Coat
    Berger Everglow Low-Sheen Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Second Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Second Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Second Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger 303 Flat Emulsion

  • Second Coat
    Berger 303 Flat Emulsion

  • Base Coat
    Berger Zinc Chromate Red Oxide Primer

  • First Coat
    Berger RustPro Anti-Rust Enamel

  • Second Coat
    Berger RustPro Anti-Rust Enamel

  • Base Coat
    Berger White Wood Primer

  • First Coat
    Berger 404 Gloss Oil Paint

  • Second Coat
    Berger 404 Gloss Oil Paint
4Why didn’t the paint hide the surface beneath in two coats as recommended?

Poor hiding occurs when paint fails to obscure or hide the surface to which it is applied.

What are the possible causes?

  • Using low-quality paint with little hiding power
  • Spreading paint too thinly or unevenly
  • Over-thinning paint beyond the recommended amount
  • Failure to prime the surface before top-coating
  • Painting a porous or absorbent surface
  • Using incorrect or poor quality tools
  • Inadequately mixed paint

What is the solution?

  • Prime first, if moving from a significantly darker to a light colour
  • When painting in a dark colour, tint primer in a similar tone to the topcoat shade
  • Use premium quality paint for better hiding and flow
  • Use quality and correct tools for the job
  • Follow manufacturer's recommendation for thinning

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Second Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Everglow Low-Sheen Emulsion

  • Second Coat
    Berger Everglow Low-Sheen Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Second Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger 303 Flat Emulsion

  • Second Coat
    Berger 303 Flat Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Second Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Second Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Base Coat
    Berger Zinc Chromate Red Oxide Primer

  • First Coat
    Berger RustPro Anti-Rust Enamel

  • Second Coat
    Berger RustPro Anti-Rust Enamel

  • Base Coat
    Berger White Wood Primer

  • First Coat
    Berger 404 Gloss Oil Paint

  • Second Coat
    Berger 404 Gloss Oil Paint

we also recommend

  • Get Inspiration

    Explore

  • Make Your Plan

    Let us design a project plan to suit your needs.

    Start

  • Colour Tools

    Explore
map
LOCATE A DEALER

CONTACT US

Queries & Feedback
PROJECT SALES
BERGER PAINT DOCTOR
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!