Others in this category
  • Berger Joint Compound Interior Fine

Berger Joint Compound Exterior Fine

It is a ready to use product ideal for filling surface irregularities before and after application of finish paints.

Berger Joint Compound is used for filling surface irregularities and indentations and hairline surface cracks. It produces a smooth and level surface prior to painting. It is used as joint filler for gypsum board and as a general repair filler up to 0.5mils.

Features

See all
Good open timeExcellent for embedding tapeSmoother working

Surface preparation:

  • Surface should be clean, dry and free from all contaminants
  • Remove old, loose flaking paint by scraping or wire brushing
  • Prime with Berger Grip & Seal Multi-Surface Primer Sealer or Berger Luxatex Primer or Berger ALD Concrete Primer

 

Application Procedure:

  • Use either a stainless steel, plastic trowel or putty knife
  • When dried sand off with sandpaper to produce a smooth surface

 

Tips: Store in a cool dry place.

Tools you will need

Paint Brush
Plastic Trowel

Available Packs


1 Gallon


5 Gallons

1 Coat
2-3 m2/kg**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

  • Get Inspiration

  • Make Your Plan

    Let us design a project plan to suit your needs.

  • Colour Tools

map
LOCATE A DEALER
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!