Classic
Sea Shells
Green Motifs
Delicate FloralsOthers in this category
WOODTECH Heavy Duty Clear Varnish
Protecting and maintaining the natural beauty of wood inside and out.
WOODTECH Heavy Duty Clear Varnish is a high performance, 2-pack, clear coating, for use on new and bare parquet and timber floors, counter tops, tables, door panels and general woodwork. Recommended as a clear furniture finish for use by furniture manufacturers and for residential use. Hard-wearing, high glossy, clear finish that will last up to four times longer than conventional one-part varnish products. Maintains the natural beauty of the timber. Excellent chemical and abrasion resistance.
Features
See all
Excellent long term durability
High resistance to frequent washingClear, flexible, tough and durable coatingSurface preparation:
- Surface must be free of contaminants such as grease, oil, wax or mould
- Clean contaminated surfaces with lacquer thinner, or other appropriate solvent
- Wipe clean before the solvent dries
- Clean surfaces before sanding to avoid sanding contaminant into the surface
- Sand with 80-grit paper
Application Procedure:
- Apply three coats of WOODTECH Heavy Duty Clear.
- A second or third coat can be applied while the previous coat is still slightly tacky
- Allow the last coat to cure thoroughly
- At room temperature, the coating will be sandable in 24 hours
- Wet sand the epoxy with 120-grit paper. Use finer grits with thinner finish coatings
- Apply two or three coats of varnish following the manufacturer's recommendations
Tips:
Sand with 120 grit-150-grit as it provides a good tooth for varnish adhesion, and coats of varnish easily fill scratches.
Tools you will need
Paint Brush
Paint Roller
Spray Gun
Available Packs
1 Gallon
1 Gallon
5 Gallons
1 Coat
9-9.5 m2/ltr**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
we also recommend
-
Get Inspiration
-
Make Your Plan
Let us design a project plan to suit your needs.
-
Colour Tools
LOCATE A DEALER
CONTACT US
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.