Trowel on is a heavy-bodied textured finish, available in a range of textures to suit every surface: ultra-fine, fine, coarse and ultra-coarse. A one-coat application which protects and obliterates concrete and rendered walls. Ideally suited to mask uneven rendered surfaces, cover imperfections and hide irregularities. Can be used as a one- coat finish to new work, previously coated surfaces and flush pointed block work.

Surface preparation:

• New and previously painted surfaces should be dry and free from contaminants e.g. loose sand, efflorescence, peeling paint
• Matt glossy surfaces
• Wire-brush friable & flaking surfaces
• Etch smooth concrete with Berger Concrete Etching Solution. Rinse surface after 30 minutes and allow to dry

Application Procedure:

• Steel Float and Plastic Trowel required
• Float evenly over the surface of the substrate with the Steel Float
• Allow to set for 3 – 15 minutes
• Use the plastic trowel in a circular motion over the surface to create desired pattern
• 14 sq. m/19L container. 2.3 kg/sq. m
• NB: Coverage will vary depending on texture chosen and surface condition
• No thinning needed. Clan up with water
• Ask for technical support on spray application

COLOUR RANGE: Standard colours and any colour by special order.

Tips: Purchase the entire requirement as this will minimise the risk of colour variation. Get free estimates from Berger.