A water-based wood stain that can be applied by brush or spray. For interior and exterior use. This high durability stain contains a wood preservative and fungus resistant. Berger Woodtech Water Based Wood Stain resists fading and can be over-coated in gloss or satin varnish. In addition Berger Water Based Wood Stain serves when tinted serves as a stain and un-tinted clear as a sealer, alone or over stains. Berger Water based wood stain is tintable in 10 standard colours and in many other colours on demand.

Surface preparation:

• Surface must be clean, smooth and free from dirt, grease, wax, old paint, bark and varnish and must be thoroughly dry
• Clean new wood with solvent to remove oils from resinous woods

Application Procedure:

• Stir to ensure even distribution of pigment
• Apply a liberal amount of stain with a foam brush or latex paint pad
• Divide project into manageable sections for better control
• Stain a complete section and wipe off excess evenly along the woodgrain, with a clean cloth
• Check for missed spots and lap marks before moving to the next section
• Sand between coats with a superfine sandpaper #320 or #400 grit
• Use an additional coat in areas of heavy use

Tips: Use Woodtech WB Clear Base or High-Performance Berger Polyurethane varnish for greater durability.