Others in this category

Woodcare Oil Based Wood Stain

Beautify and protect wood surfaces while enhancing their natural beauty with WOODTECH Oil-Based Wood Stain.

Woodcare Oil Based Wood Stains penetrate wood to provide waterproofing protection for up to two years on decks and up to four years on interior surfaces. WOODCARE Oil Based Wood Stain is a semi-transparent stain that will provide the colour you want in 1, 2 or 3 coats as desired and will still allow the beauty of the woodgrain to be seen.

Features

Anti-Fungal and Anti-Algal Properties

Prevents mould and algae from forming on the surface

For interior and exterior use

Versatile inside and out

Penetrates wood to provide protection

Provides greater resistance and protection especially for exterior applications

Enhances the natural beauty of the wood grain

Stains yet beautifies the wood and maintains the wood grain

For properly prepared wood, decks, patios and furniture

Multiple use on a variety of wood surfaces

Stains and seals wood

Colours and protects at the same time

Surface preparation:

Surface must be clean, dry and free of contaminants
Remove loose wood fibres, latex, oil-based and acrylic coatings on new or weathered wood
Sand light to medium exterior stains caused by mould, mildew, algae & fungus
Treat residual fungus and algae with Berger Sterilizing Solution

Application Procedure:

Do not use if rain is expected within 24 hours
Bare wood surfaces must be completely dry
Made ready to use
No thinning required
Stir product occasionally throughout application
Use natural bristle, synthetic filament brush, or pad applicator
Rolling on rough surfaces only
Use a 3/8″ nap roller
A high quality pump sprayer may be used
Work in small sections to saturate wood
Maintain a wet edge and always back-brush

Tips: For optimum performance, coat wood on all sides. Over application will lead to surface failure, peeling and cracking. Avoid applying stain too heavily.

Tools you will need

Paint Brush

Paint Roller

Spray Gun

Available Packs

1 Gallon

5 Gallons

1 Coat

9-10 m²/ltr^**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

^** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.