Others in this category

Berger Clear Acrylic Over Glaze

Berger Clear Acrylic Over Glaze is an attractive transparent clear coating with good sealing properties.

Material Safety Data Sheet

Product Data Sheet

Berger Clear Acrylic Over Glaze is designed to seal and protect pickled or stained surfaces as well as surfaces glazed with special effect paints. It can also be used to seal clay tile floors. This 100% acrylic clear also provides excellent protection against the growth of algae, fungi.

Features

Low VOC

Complies with global environmental standards with minimal impact on the environment

Anti-Fungal and Anti-Algal Properties

Prevents mould and algae from forming on the surface

Dries in 15 minutes

Fast drying, so painted areas may be used more quickly

Excellent Flow and levelling Properties

Smooth and easy to apply clear coating

Good chemical resistance

Tough acrylic properties make surface easier to clean and to keep clean

Seals and Protects

Provides longer durability and washability

Superior protection

Protects textured, wood and clay surfaces against dirt and grime

Finishes –

Glossy

Surface preparation:

Ensure adequate ventilation during application and drying
Make sure surface is free from all debris
Do not apply when humidity exceeds 95% and condensation is likely
If the surface is cracking or peeling remove the loose material by scraping
Treat any fungal or algal growth with Berger Sterilizing Solution

Application Procedure:

Stir thoroughly before use, do not shake
Apply an even coat taking care to avoid runs and sags
It appears milky white when wet but dries to a clear finish
Do not apply very thick coats.
Apply two to three thin coats
Additional coats will result in a film with higher sheen
Avoid over brushing to prevent bubbles in the film

Tips: Do no use on vinyl or glazed tiles, linoleum or metal.

Tools you will need

Spray

Roller

Paint Brush

Available Packs

1 Gallon

5 Gallons

1 Coat

9.0 m²/Ltr^**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

^** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.