Themes

My Profile My Library Logout

Others in this category

Berger Trowel-On Coarse

Proudly used on the interior and exterior surfaces of residential and commercial properties across the Region for over 30 years.

Material Safety Data Sheet Product Data Sheet

Trowel on is a heavy-bodied textured finish, available in a range of textures to suit every surface: ultra-fine, fine, coarse and ultra-coarse. A one-coat application which protects and obliterates concrete and rendered walls. Ideally suited to mask uneven rendered surfaces, cover imperfections and hide irregularities. Can be used as a one- coat finish to new work, previously coated surfaces and flush pointed block work.

Features

See all

Anti-Fungal and Anti-Algal Properties

For interior and exterior use

Weather Resistance Properties

Surface preparation:

New and previously painted surfaces should be dry and free from contaminants e.g. loose sand, efflorescence, peeling paint
Matt glossy surfaces
Wire-brush friable & flaking surfaces
Etch smooth concrete with Berger Concrete Etching Solution. Rinse surface after 30 minutes and allow to dry

Application Procedure:

Steel Float and Plastic Trowel required
Float evenly over the surface of the substrate with the Steel Float
Allow to set for 3 – 15 minutes
Use the plastic trowel in a circular motion over the surface to create desired pattern
14 sq. m/19L container. 2.3 kg/sq. m
NB: Coverage will vary depending on texture chosen and surface condition
No thinning needed. Clan up with water
Ask for technical support on spray application

COLOUR RANGE: Standard colours and any colour by special order.

Tips: Purchase the entire requirement as this will minimise the risk of colour variation. Get free estimates from Berger.

Tools you will need

Plastic Trowel

Steel Trowel

Available Packs

1 Gallon

1 Coat
2.5 m²/kg^**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

^** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Solve Potential Paint Problems

1What’s causing white crusty deposits on the walls?

Efflorescence is the formation of crusty white salt deposits, leaching on to the surface of masonry or mortar as water passes through it.

What are the possible causes?

Efflorescence occurs when water gets into concrete and dissolves lime within the concrete matrix
As the water evaporates, lime is carried to the surface and deposited as salt
Excess moisture escaping through the walls
Insufficient curing time for new cement or mortar
Painting on incompletely dried or uncured concrete
Failing to adequately prepare the surface by removing all previous efflorescence

What is the solution?

Eliminate the source
Seal cracks with Berger Siliconized Acrylic Caulk
Remove efflorescence and loose material by wire brush or power washer
Apply Berger Alkali Sealer
Apply a premium quality topcoat like Berger Weatherproof Ultra

We recommend you use these painting systems in order of base coat, first coat, and second coat:

Base Coat
Berger Concrete Primer
First Coat
Berger WeatherProof Ultra Semi-Gloss
Second Coat
Berger WeatherProof Ultra Semi-Gloss

Base Coat
Berger Concrete Primer
First Coat
Berger Trowel-On Coarse

Base Coat
Berger Concrete Primer
First Coat
Berger Royale Luxury Interior Satin Emulsion
Second Coat
Berger Royale Luxury Interior Satin Emulsion

Base Coat
Berger Concrete Primer
First Coat
Berger Everglow Low-Sheen Emulsion
Second Coat
Berger Everglow Low-Sheen Emulsion

we also recommend

Get Inspiration

Explore
Make Your Plan

Let us design a project plan to suit your needs.

Start
Colour Tools

Explore

LOCATE A DEALER

CONTACT US

Queries & Feedback

PROJECT SALES

BERGER PAINT DOCTOR

Note:-

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.