Classic
Sea Shells
Green Motifs
Delicate Florals
Berger RustPro Anti-Rust Enamel
A semi-industrial product for interior / exterior metal & wood. Its anti-corrosive feature makes it withstand the harsh Caribbean weather.
Surface preparation:
- New metal and repainted surfaces must be clean and free from dirt and grease
- Remove rust and scale by wire brushing
- Apply one coat of Berger RustPro Primer or Berger Red Oxide Primer
- Clean the surface of aluminium/galvanized metal with no.2 reducer to remove any grease
- Treat the surface with Berger Self-Etch Primer
- For new wood surface must be clean, dry and free from dirt
- Seal knots with Berger Knotting varnish
- Apply one coat of Berger Wood Primer before top-coating
- For previously painted wood sand where necessary
Application Procedure:
- Do not apply when humidity exceeds 95% and condensation is expected
- Use 5% to 10% Berger no.2 reducer to thin if necessary
COLOUR RANGE: Product comes in seven standard colours including white and black
Tips: Clean brushes with Berger no.2 Reducer.
Tools you will need
Available Packs
1 Gallon
1 Coat
11.00 m2/Ltr**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
Washability
- Best-in-class
- High
- Medium
- Low
Solve Potential Paint Problems
The splitting of dry paint film through at least one coat. In early stages it appears as hairline cracks and in the later stages flaking occurs.
What are the possible causes?
- Applying low quality paint to the surface, with inadequate adhesion and flexibility
- Applying too thin a coat of paint to the surface
- Inadequate surface preparation
- Failure to prime bare wood before top-coating
- Oil paint hardens with age, until it eventually cracks
- Painting on damp wood
What is the solution?
- Remove loose paint or flaking paint by scraping or wire brushing
- Sand the area to feather the edges
- Prime bare spots
- Repaint with two coats of a premium paint
- Berger recommends 2 topcoats over 1 primer coat
We recommend you use these painting systems in order of base coat, first coat, and second coat:
Base CoatBerger Wood Primer White
First CoatBerger Everglow Low-Sheen Emulsion
Second CoatBerger Everglow Low-Sheen Emulsion
Base CoatBerger Wood Primer White
First CoatBerger 404 House & Roof Paint
Base CoatBerger Wood Primer White
First CoatBerger RustPro Anti-Rust Enamel
we also recommend
-
Get Inspiration
-
Make Your Plan
Let us design a project plan to suit your needs.
-
Colour Tools
