Berger Trowel-On Course

Proudly used on the interior and exterior surfaces of residential and commercial properties across the Region for over 30 years.

Trowel on is a heavy-bodied textured finish, available in a range of textures to suit every surface: ultra-fine, fine, coarse and ultra-coarse. A one-coat application which protects and obliterates concrete and rendered walls. Ideally suited to mask uneven rendered surfaces, cover imperfections and hide irregularities. Can be used as a one- coat finish to new work, previously coated surfaces and flush pointed block work.

Features

See all
Anti-Fungal and Anti-Algal PropertiesFor interior and exterior useWeather Resistance Properties

Surface preparation:

  • New and previously painted surfaces should be dry and free from contaminants e.g. loose sand, efflorescence, peeling paint
  • Matt glossy surfaces
  • Wire-brush friable & flaking surfaces
  • Etch smooth concrete with Berger Concrete Etching Solution. Rinse surface after 30 minutes and allow to dry

 

Application Procedure:

  • Steel Float and Plastic Trowel required
  • Float evenly over the surface of the substrate with the Steel Float
  • Allow to set for 3 – 15 minutes
  • Use the plastic trowel in a circular motion over the surface to create desired pattern
  • 14 sq. m/19L container. 2.3 kg/sq. m
  • NB: Coverage will vary depending on texture chosen and surface condition
  • No thinning needed. Clan up with water
  • Ask for technical support on spray application

 

COLOUR RANGE: Standard colours and any colour by special order.

 

Tips: Purchase the entire requirement as this will minimise the risk of colour variation. Get free estimates from Berger.

Tools you will need

Plastic Trowel
Steel Trowel

Available Packs


1 Gallon

1 Coat
2.5 m2/kg**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Solve Potential Paint Problems

1What’s causing white crusty deposits on the walls?

Efflorescence is the formation of crusty white salt deposits, leaching on to the surface of masonry or mortar as water passes through it.

What are the possible causes?

  • Efflorescence occurs when water gets into concrete and dissolves lime within the concrete matrix
  • As the water evaporates, lime is carried to the surface and deposited as salt
  • Excess moisture escaping through the walls
  • Insufficient curing time for new cement or mortar
  • Painting on incompletely dried or uncured concrete
  • Failing to adequately prepare the surface by removing all previous efflorescence

What is the solution?

  • Eliminate the source
  • Seal cracks with Berger Siliconized Acrylic Caulk
  • Remove efflorescence and loose material by wire brush or power washer
  • Apply Berger Alkali Sealer
  • Apply a premium quality topcoat like Berger Weatherproof Ultra

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Grip & Seal Multi-Surface Primer/Sealer

  • First Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Second Coat
    Berger Royale Water Based Luxury Gloss Enamel
  • Get Inspiration

  • Make Your Plan

    Let us design a project plan to suit your needs.

  • Colour Tools

map
LOCATE A DEALER
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!