Features

Surface preparation:

• Surface should be clean and free from all dirt and loose debris
• Cracks should be filled using a mixture of 1 part Roofing Compound and 2 to 3 parts building sand (150 mesh)
• Do not apply when humidity is high or the surface is wet

Application Procedure:

• Apply the first coat with a roller in one direction after diluting 4 parts Roofing Compound with 1 part water to improve penetration and adhesion
• Active, shifting or wide cracks, which have already been filled should be reinforced by laying a polyester gauze (mesh) over the crack, after applying the first coat
• Saturate the gauge (mesh) with about 5% thinned Roofing Compound (1/2 pint water to 1 gallon roofing Compound) and allow to dry overnight
• Apply the second coat without thinning after 24 hours drying
• Minimum coverage is 40 sq.ft. per gallon at film thickness

Tips: Apply the second coat in one direction, but at right angle to the direction of the first coat’s application.